The replacement hardware kit for a Westin HDX Grille Guard for a 2014 GMC Sierra 1500 # 57-3690 or # 57-3695 is available with # 57-369PK. I can't confirm that this will work on anything outside of a Westin HDX and to my knowledge Westin is still doing business under that name. view full answer...
If you need to add a ladder rack to your 2021 GMC Sierra 1500 wit the 5-3/4 foot bed but already have a RetraxPRO MX # RT80471 installed, you are in luck! We have actually been asked this a few times as it is pretty common to want both options.
With that said, you will need to swap out your current side rails for the Replacement Side Rails for RetraxPRO Hard Tonneau Cover with Trax Rails # RTX27FR. We have confirmed with Retrax that this is ok to do and it will give you the ability to... view full answer...
The Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks - Qty 1 # TARB-11032-1 is the correct replacement for the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension # TH43002XT-782EX. This replacement block does not include any hardware.
If you need the hardware, you'll also want Hardware Kit # TAHD-21501. view full answer...
As long as you keep the weight of your trailer below 3300lbs the Karrier ST175/80R13 Radial Trailer Tire - Load Range D # AM10210 would be an exact replacement that have a load rating of 1650lbs at 70 PSI.
For a tire that has a load rating higher than the GVWR of the trailer you will need to step up to a 14" wheel and use the Karrier ST205/75R14 Radial Trailer Tire - Load Range D # AM10235 which has a load rating of 2200lbs at 75 PSI. This tire will be 2.2" taller overall and 1" wider... view full answer...
You will need the Replacement Mounting Hardware Kit # 21-53468PK for the Stainless Westin PRO TRAXX Oval Nerf Bars # 21-534680 on your 2021 GMC Sierra 1500. This kit will also fit the Black # 21-534685 steps as well. view full answer...
The backing plate is not available separately from the entire assembly for this part number. When the backing plate needs replacing, the other components need replaced as well.
The B10EA-21 AxleTek 10" x 2 1/4" LH Self-Adjusting Electric Brake Assembly is # AKEBRK-35L-SA. If you want the set, then use # AKEBRK-35-SA. These are exact replacements and will allow zero maintenance once initially adjusted. I've attached a video to assist.
To get the initial adjustment, we recommend... view full answer...
The only suspension enhancement option we offer for models with adaptive ride control is the Timbren Suspension Enhancement System part # GMRCK15MR which was designed around this exact package.
It's a direct replacement for a 2021 GMC Sierra 1500 Denali. view full answer...
There is one tonneau cover that is narrow enough to fit and work well between the base rails of the TracRac SR sliding ladder rack part # TH43002XT-781 you have installed on your 2015 GMC Sierra 1500 and it's the Bak Revolver part # BAK39121. This sets far enough to the inside of the truck bed rails that it can easily roll up with the TracRac installed unlike other options.
I attached an install video link to this page that shows this installed on a similar 2015 Sierra as well. view full answer...
If you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 on your 2015 GMC Sierra 1500 which is for a 5-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21782 but if you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-781 on your 2015 GMC Sierra 1500 which is for a 6-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21781. view full answer...
I can certainly point you in the right direction. When replacing an equalizer we want to keep it as close to the stock size as possible. There is a small amount of tolerance, but not much. The Dexter easy flex # K71-653-00 i'm afraid is going to be too big to fit correctly into your suspension.
If you want to do an equalizer upgrade, I recommend the Road Armor Shock Absorbing Equalizer # LC696740. This measures 6" long center hole to center hole, and 3-1/4" tall. This will be much closer... view full answer...
I was able to get in touch with my contact over at Extang and they confirmed that you can use the # EX43445B as the replacement cover for your original Extang Trifecta tonneau cover. view full answer...
The part you need is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera # FR87PR. This works with your 2021 GMC Sierra 1500. view full answer...
The correct replacement rear header for your TruXedo Lo Pro tonneau cover is the Replacement Rear Header for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX5725-RearHeader. view full answer...
The correct replacement tarp for your Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails - Aluminum and Vinyl # 311-JEC95A17 on your 2016 GMC Sierra 1500, is the:
-Replacement Tarp for Pace Edwards JackRabbit Hard Tonneau Cover # PE65TJ. view full answer...
I contacted Westin and the mounting kit/hardware for their # 28-51035 R5 Nerf Bars is not available separately at this time. The only thing we could do to replace it would be a full replacement of the entire system, unfortunately. view full answer...
I may have a solution for you, however the Pro Series Replacement Handle Kit # 58180 referenced in your question is not compatible with your Reese 5th Wheel Trailer Hitch w/ Square Tube Slider # RP30051. This replacement handle is designed specifically for the Pro Series model # 30056.
The only replacement handle we currently have available that will fit your Reese 5th Wheel is the Reese # 58055, which does have a similar bend at the handle when compared to the original piece that came... view full answer...
If you are just looking to replace just the knobs on the Toolbox Mounting Kit for TracRac part # TH25200 then you can use the Replacement Hand Knob for TracRac Ladder Rack part # TAKB-90004. These are round knobs and the knobs included in the toolbox mounting kit are more of a triangle shape but nonetheless will still work for you. We do not have the triangle shaped knobs at this time.
The above part is only for the replacement knob, you will also need the threaded stud in order to attach... view full answer...
The correct replacement tarp for a Truxedo LoPro # TX572001 is the Replacement Tarp for TruXedo Lo Pro Roll-up Tonneau Cover - Black # TX572001-CVR. view full answer...